stephenbrooks.orgForumMuon1GeneralGrapphics Problem
Username: Password:
Search site:
Subscribe to thread via RSS
Pilgrim
2005-12-09 20:40:47
After the first work unit runs, the project dies on me and just stops.  Whether I use the screensaver or just run Muon1. There is plenty of RAM left.  It is not the heat (53 degrees C).  I have run every known DC project on this machine 24/7 along with their screensavers with no problems.  The command line runs fine.  The screen resolution on this machine is 1920x1200, just fyi.  The graphics are too cool not to run even though I know it will run faster with the command line.  Help.
Stephen Brooks
2005-12-13 07:20:23
Odd... The 1920x1200esolution shouldn't be a problem, though you could just check by reducing it to (say) 1024x768 in the config.txt file and then seeing if the graphics works.

Also - try to see if there's a "dderr.log" file in the directory.
: contact : - - -
E-mail: sbstrudel characterstephenbrooks.orgTwitter: stephenjbrooksMastodon: strudel charactersjbstrudel charactermstdn.io RSS feed

Site has had 25162679 accesses.