stephenbrooks.orgForumMuon1GeneralConverter from any Linac900RemovableX to any Y lattice
Username: Password:
Search site:
Subscribe to thread via RSS
Stephen Brooks
2009-02-16 16:07:05 is a script that will take genomes from any of the current various Linac900RemovableX lattices and converts it to every one of the others.

For some reason seeding them with the best from the old ...1 optimisation produced slow growth, so we could try restarting with the best of the ...6 optimisation, which was higher.  Of course, converting to a lattice with less parameters loses some detail (it averages together adjacent blocks).
Stephen Brooks
2009-02-16 16:09:18
In fact I have done that now.
Stephen Brooks
2009-02-19 16:33:56
The ...12 converted lattice has done well but for some reason the ...3 converted version of the ~3.6% result from the ...6 lattice did this:

0.021764 (1166.9 Mpts) [v4.44e] <Linac900Removable3>

Not quite sure why the converter totally broke it yet.
2009-02-21 03:01:31
Stephen, Would you be so kind and explain how to use this script.  What Imust do and where to place.  No rush.  Boots.
Stephen Brooks
2009-02-27 11:37:30
You paste a result from results.txt or .dat (two lines, the first very long) into that box, then press the Calculate button.  It spits out various ones with "TEST" on the second line that you can put in queue.txt and have your Muon1 installation run.
: contact : - - -
E-mail: sbstrudel characterstephenbrooks.orgTwitter: stephenjbrooksMastodon: strudel charactersjbstrudel RSS feed

Site has had 26080373 accesses.